|3-Strand 90° Round Belt Transfer|
Shown w/ Optional Blue Paint
|TRANSFER ARM: 10 ga. formed
TRANSFER BELT: 3/8" dia. round polyurethane belt.
LENGTHS: Transfer designed to mount in 796LS line shaft conveyors 15"-39" BF.
BELT CENTERS: 12"
ONE DIRECTION FLOW: Transfers product in one direction.
TAKE-UP: Adjustable sheaves provides
take-up of transfer belt.
BEARINGS: Heavy duty, lubricated, ball bearing units with cast iron housings.
BELT SPEED: Driven at 150% of speed as powered section transfer is mounted in.
|LIFT: 3/4" positive lift.
MOTOR DRIVE: Optional.
CAPACITY: 100 lbs.
AIR CONTROLS: Air cylinder with single solenoid valve.
FLOOR SUPPORTS: Transfer is designed to attach to 796LS/738LS conveyors w/ mounting hardware integral feature of transfer.
NOTE: Specify twist (clockwise or counter clockwise) for drive bands on line shaft conveyor (model LS or LSA) that transfer mounts in. Consult factory.